FiltersDone

Question type

Essay

Multiple Choice

Short Answer

True False

Matching

Exam 6: Differential Analysis: the Key to Decision Making

Show Answer

Share

---

All types

Filters

Study FlashcardsPractice ExamLearn

Question 41

True/False

Review LaterAdd Note

Review Later

A vertically integrated company is less dependent on its suppliers than a company that is not vertically integrated.

A) True
B) False

Correct Answer

verified

Show Answer

Question 42

Multiple Choice

Review LaterAdd Note

Review Later

Zouar Computer Corporation currently manufactures the disk drives that it uses in its computers. The costs to produce 5,000 of these disk drives last year were as follows: Kidal Electronics has offered to provide Zouar with all of its disk drive needs for $27 per drive. If Zouar accepts this offer, Zouar will be able to use the freed up space to generate an additional $40,000 of income each year to produce more of its computer keyboards. Only $3 per drive of the fixed manufacturing overhead cost above could be avoided. Direct labor is an avoidable cost in this decision. Based on this information, would Zouar be financially better off making the drives or buying the drives and by how much?

A) $15,000 better to buy
B) $20,000 better to buy
C) $35,000 better to buy
D) $60,000 better to make

E) B) and C)
F) A) and D)

Correct Answer

verified

Show Answer

Question 43

Multiple Choice

Review LaterAdd Note

Dock Corporation makes two products from a common input. Joint processing costs up to the split-off point total $33,600 a year. The company allocates these costs to the joint products on the basis of their total sales values at the split-off point. Each product may be sold at the split-off point or processed further. Data concerning these products appear below: What is the minimum amount the company should accept for Product X if it is to be sold at the split-off point?

One way to increase the effective utilization of a bottleneck is to reduce the number of defective units.

Bruce Corporation makes four products in a single facility. These products have the following unit product costs: Additional data concerning these products are listed below. The grinding machines are potentially the constraint in the production facility. A total of 9,000 minutes are available per month on these machines. Direct labor is a variable cost in this company. Which product makes the LEAST profitable use of the grinding machines? (Round your intermediate calculations to 2 decimal places.)

Munafo Corporation is a specialty component manufacturer with idle capacity. Management would like to use its extra capacity to generate additional profits. A potential customer has offered to buy 6,500 units of component VGI. Each unit of VGI requires 1 unit of material I57 and 5 units of material M97. Data concerning these two materials follow: Material I57 is in use in many of the company's products and is routinely replenished. Material M97 is no longer used by the company in any of its normal products and existing stocks would not be replenished once they are used up. What would be the relevant cost of the materials, in total, for purposes of determining a minimum acceptable price for the order for product VGI?

McGraw Company uses 5,000 units of Part X each year as a component in the assembly of one of its products. The company is presently producing Part X internally at a total cost of $100,000, computed as follows: $\begin{array} { l r } \text { Direct materials } & \$ 15,000 \\\text { Direct labor } & 30,000 \\\text { Variable manufacturing overhead } & 10,000 \\\text { Fixed manufacturing overhead } & 45,000 \\\text { Total costs } & \$ 100,000\end{array}$ An outside supplier has offered to provide Part X at a price of $18 per unit. If McGraw Company stops producing the part internally, one-third of the fixed manufacturing overhead would be eliminated. Assume that direct labor is a variable cost. Required: Prepare an analysis showing the annual financial advantage or disadvantage of accepting the outside supplier's offer.

Wallen Corporation is considering eliminating a department that has an annual contribution margin of $80,000 and $160,000 in annual fixed costs. Of the fixed costs, $90,000 cannot be avoided. The annual financial advantage (disadvantage) for the company of eliminating this department would be:

Elly Industries is a multi-product company that currently manufactures 30,000 units of part MR24 each month for use in production of its products. The facilities now being used to produce part MR24 have a fixed monthly cost of $150,000 and a capacity to produce 35,000 units per month. If Elly were to buy part MR24 from an outside supplier, the facilities would be idle, but its fixed costs would continue at 40% of their present amount. The variable production costs of Part MR24 are $11 per unit. If Elly industries is able to obtain part MR24 from an outside supplier at a purchase price of $10 per unit, the monthly financial advantage (disadvantage) of buying the part rather than making it would be:

The Freed Corporation produces three products, X, Y, Z, from a single raw material input. Product Y can be sold at the split-off point for total annual revenues of $50,000, or it can be processed further at a total annual cost of $16,000 and then sold for $68,000. Which of the following statements is true concerning Product Y?

The constraint at Rauchwerger Corporation is time on a particular machine. The company makes three products that use this machine. Data concerning those products appear below: Assume that sufficient time is available on the constrained machine to satisfy demand for all but the least profitable product. Up to how much should the company be willing to pay to acquire more of the constrained resource? (Round your intermediate calculations to 2 decimal places.)

Elly Industries is a multi-product company that currently manufactures 30,000 units of part MR24 each month for use in production of its products. The facilities now being used to produce part MR24 have a fixed monthly cost of $150,000 and a capacity to produce 35,000 units per month. If Elly were to buy part MR24 from an outside supplier, the facilities would be idle, but its fixed costs would continue at 40% of their present amount. The variable production costs of Part MR24 are $11 per unit. If Elly Industries continues to use 30,000 units of part MR24 each month, it would realize a financial advantage by purchasing this part from an outside supplier only if the supplier's unit price is less than:

Marley Corporation makes three products (X, Y, & Z) with the following characteristics: The company has a capacity of 2,000 machine hours, but there is virtually unlimited demand for each product. In order to maximize total contribution margin, how many units of each product should the company produce?

Faustina Chemical Corporation manufactures three chemicals (TX14, NJ35, and KS63) from a joint process. The three chemicals are in industrial grade form at the split-off point. They can either be sold at that point or processed further into premium grade. Costs related to each batch of this chemical process is as follows: For which product(s) above would it be more profitable for Faustina to sell at the split-off point rather than process further?

Balser Corporation manufactures and sells a number of products, including a product called JYMP. Results for last year for the manufacture and sale of JYMPs are as follows: Balser is trying to decide whether to discontinue the manufacture and sale of JYMPs. All expenses other than fixed manufacturing overhead are avoidable if the product is dropped. None of the fixed manufacturing overhead is avoidable. Assume that dropping Product JYMP would result in a $90,000 increase in the contribution margin of other products. If Balser chooses to discontinue JYMP, the annual financial advantage (disadvantage) of eliminating this product should be:

Gallerani Corporation has received a request for a special order of 6,000 units of product A90 for $21.20 each. Product A90's unit product cost is $16.20, determined as follows: Assume that direct labor is a variable cost. The special order would have no effect on the company's total fixed manufacturing overhead costs. The customer would like modifications made to product A90 that would increase the variable costs by $4.20 per unit and that would require an investment of $21,000 in special molds that would have no salvage value. This special order would have no effect on the company's other sales. The company has ample spare capacity for producing the special order. The annual financial advantage (disadvantage) for the company as a result of accepting this special order should be:

When a company has a production constraint, total contribution margin will be maximized by emphasizing the products with the highest contribution margin per unit of the constrained resource.

Gordon Corporation produces 1,000 units of a part per year which are used in the assembly of one of its products. The unit cost of producing these parts is: The part can be purchased from an outside supplier at $20 per unit. If the part is purchased from the outside supplier, two thirds of the total fixed costs incurred in producing the part can be avoided. The annual financial advantage (disadvantage) for the company as a result of buying the part from the outside supplier would be:

Paine Corporation processes sugar beets in batches that it purchases from farmers for $72 a batch. A batch of sugar beets costs $11 to crush in the company's plant. Two intermediate products, beet fiber and beet juice, emerge from the crushing process. The beet fiber can be sold as is for $27 or processed further for $16 to make the end product industrial fiber that is sold for $40. The beet juice can be sold as is for $43 or processed further for $28 to make the end product refined sugar that is sold for $100. Which of the intermediate products should be processed further?

Supler Corporation produces a part used in the manufacture of one of its products. The unit product cost is $18, computed as follows: An outside supplier has offered to provide the annual requirement of 4,000 of the parts for only $14 each. The company estimates that 60% of the fixed manufacturing overhead cost above could be eliminated if the parts are purchased from the outside supplier. Assume that direct labor is an avoidable cost in this decision. Based on these data, the financial advantage (disadvantage) of purchasing the parts from the outside supplier would be: